GetUploadReadyOpen the tools

PRACTICAL GUIDES

Prepare a file that fits.

Start with the receiving website’s requirements. These examples show what to change, what to preserve and what to check before uploading.

By Hayden McGregor · Updated 31 October 2026

1. Prepare an image for a 200 KB limit

A file-size limit is a limit on data, not on width or height. In GetUploadReady, 200 KB means 200,000 bytes. First check whether the receiving form accepts JPEG, PNG or WebP and whether it also specifies pixel dimensions.

  1. Open Resize & compress and choose your image.
  2. Open Requirements, choose Meet a file-size limit and enter 200 KB. Select Done.
  3. If the original already passes, use that original. Otherwise select Prepare image.
  4. Check the result’s format, dimensions and file size. Look closely at text and faces in the prepared preview before saving.

Worked example: no compression needed

In our browser check, the built-in sample was a 1600 × 1000 PNG, 74.5 KB. With a 200 KB limit, the tool correctly offered the original as already suitable. Preparing another copy kept the same displayed size and dimensions.

74.5 KB original → 200 KB maximum → use the original.

This is a real sample check, not a promise of a particular compression ratio. Your image’s detail, format and browser affect the result.

When the result is still too large

JPEG and WebP allow quality reduction. PNG is different: re-encoding can make it larger, especially for photographs. If offered, use Try JPEG under your limit only when JPEG is accepted. This explicitly changes the format; it does not secretly shrink the image.

If that still fails, check whether smaller dimensions are allowed, then use Custom requirements. Do not reduce the size of an identity photograph below the recipient’s minimum dimensions just to pass a byte limit. A technically small enough image can still be rejected because its text or face is unclear.

Avoid: repeatedly compressing an already compressed copy. Return to the original for each attempt. The tool withholds saving a failed size-limited result rather than calling it a pass.

2. Resize without cropping your photograph

Use Keep whole image · white padding when every edge matters. Use centre crop only when you can afford to lose content around the edges. Both keep the picture’s proportions; neither stretches it.

Landscape image fitted into a squareA landscape rectangle becomes a square with white padding above and below. The whole original remains visible.1600 × 1000Whole image
Geometry example: 1600 × 1000 fitted into 600 × 600 gives a 600 × 375 picture, with approximately 112–113 pixels of white padding above and below. This diagram illustrates fit, not a measured file-size result.
  1. Choose Resize dimensions in Requirements.
  2. Enter the required width and height, for example 600 × 600 pixels.
  3. Select Keep whole image · white padding, then Done and Prepare image.
  4. Inspect the edges, signature, face or text. Save only after checking the result.

With centre crop, the same landscape example loses the left and right edges to fill a square. White padding avoids that loss, but some application forms prohibit borders. Follow the receiving form’s rules.

Why does it look blurry or have white space?

White space is expected when the source and target have different proportions. Increasing pixel dimensions cannot restore missing detail. If small writing becomes hard to read, use a clearer original or larger permitted dimensions. Transparent areas also become white in prepared copies. Keep the original if its metadata, colour profile or digital signature must be preserved.

3. Make a readable PDF from photographs

This is useful for a small set of receipts, photographed forms or notes. Each image becomes one page. It is not a scanner with OCR, and it cannot merge existing PDF files.

Example: a three-page submission

1. First page → 2. Second page → 3. Supporting receipt

Choose three photos, then use Move up and Move down until the list matches this order. The generated PDF should contain three pages in that same order. Remove accidental duplicates before creating it.

  1. Photograph each sheet flat, with even light and all four corners visible. Avoid shadows, glare and fingers covering text.
  2. Open Images to PDF. Choose JPEG, PNG or still WebP photos. HEIC and existing PDFs cannot be imported.
  3. Arrange the pages. Choose A4 or US Letter according to the recipient’s needs.
  4. Use Automatic orientation for mixed portrait and landscape photographs, or All portrait for a consistent upright document.
  5. Select Create PDF. Use Save or share PDF, or Download instead. On iPhone, choose Save to Files and then Save.
  6. Reopen the saved PDF. Check the page count, order and readability of every page before submitting it.

Check these limitations before relying on the file

The tool fits each photo onto a page without cropping. It reduces images to at most 2400 pixels on the longest edge and encodes them as JPEG within the PDF. Small print may soften. Text stays a picture: it is not searchable or editable text, and there is no guaranteed PDF file-size limit.

You can select up to 10 images, no more than 20 MB each or 50 MB combined. Each image must also fit the pixel limits in Help. If creation fails, try fewer or smaller images. If you change the order, paper size or orientation, create the PDF again so the saved result reflects your choices.

Downloaded but cannot find it?

Check Files, Downloads or the destination you chose in the share menu. A successful share handoff does not prove a file was saved. If your browser opens a preview, use its save controls and then reopen the saved copy. Never assume a result was sent to the receiving organisation: you must submit it yourself.

Your originals stay yours

Preparation takes place in your browser and leaves the original files unchanged. Sharing to another app or cloud folder sends the result to your chosen destination. See our privacy notice, full limits and help, or contact us if a step fails.

Prepare an image Make a PDF